 |
Chemex Coffee Filter Fits Most Conical Filter Coffeemakers - 100 Bonded Oxygen Cleansed Prefolded Filters by Chemex
List Price: $12.00Our Price: $7.50You Save: $4.50 (38%)Availability: Usually ships in 4-5 business days Category: Kitchen See more product details
Product SummaryManufacturer: Chemex Brand: Chemex Model: FS-100 Accessories:
Kitchen and Housewares Reviews of Chemex Coffee Filter Fits Most Conical Filter Coffeemakers - 100 Bonded Oxygen Cleansed Prefolded FiltersCustomer Review: Using it for the Krups Moka Brew Summary: 4 Stars
I don't have a Chemex brewer, but I do use a Krups Moka Brew. The filters for the Krups are expensive and difficult to find, so I tested these Chemex filters to see how they would perform. A square Chemex filter is 12" x 12", which means that I can cut out 9 Krups-sized filters out of each one. A box of 100 Krups filters costs 7 to 10 bucks. For about the same price, I get 900 from the Chemex. The Chemex filters are also thicker than the Krups filters - I'd say about 20%.
I've been using the Krups Moka Brew for several years and love the coffee it makes (and you can even do an abbreviated brew to make something that resembles espresso). I ran several back-to-back brews comparing the performance of the Krups filter vs. the Chemex filter on my Moka Brew. I used 20 grams of the same home roasted coffee with 500mL of water for each brew, and a Capresso Infinity grinder. Skip to the conclusion if you just want the results.
A) Krups filter. I used only one filter and tamped down with a moderate amount of force. The beans were ground on the finest "fine" setting (#5). This is how I usually do it on the Moka brew. From the time the water hits the coffee, it took 3m50s for the brewing to complete. Initially there was the characteristic delicious looking thick drip with the dense crema - it looks close to espresso, with a bit of the mouse tailing (sometimes I stop the brew at about 30 seconds and just drink that. It's close to espresso and very delicious). The complete brew had a lot of body with robust flavor, like a great americano.
B) One Chemex filter. I ground the beans and tamped them like with the Krups filter. I was shocked to see how fast the water came through. It was a waterfall compared to the rich stream from the Krups filter. The brewing time was only 2m20s. There was none of that rich dense crema at the initial stages and the resulting coffee tasted more like a drip brew. It had thinner body vs the Krups filter, and the flavor was cleaner. It's still a decent cup of coffee, but I was surprised at the amount of difference the filter made.
C) Two Chemex filters. I decided to use two filters, one on top and one on the bottom. I also changed the grind setting to 3 notches finer (#2). I tamped it pretty hard. The brewtime for this was comparable to using one Krups filter - 3m45s. However, the brew still looked different vs the Krups. While it was no longer the waterfall that it was with just one Chemex filter, and the drip rate was similar to that of the Krups filter, the characteristics were still very different. Mainly, it still lacked that rich looking initial brew stage that you get with the Krups filter. The body was thicker vs using one filter, but still slightly thinner than with the Krups filter.
Conclusion: The Krups filter makes a huge difference versus using the Chemex filter. Despite being thicker, the Chemex filter results in a faster brew with less body and a cleaner cup profile. The Chemex results are still good, but closer to a normal drip brew, rather than a moka/americano quality one gets with a Krups filter. I recommend using a finer grind with the Chemex filter, and using two (or more?) filters - at least when brewing less than a full pot. The Chemex filters will still be cheaper since they're roughly 1/7 the price of a Krups filter. I can't say that one result is better than the other - it's a matter of preference. I prefer a fuller body (and an occasional "espresso" from the Moka brew), so I'll still get the Krups filters despite the high price. However, the Chemex filter is an option when the Krups filters are unavailable (as often happens). The Chemex might also result in better coffee for beans that are brighter and lightly roasted - worth testing.
Description of Chemex Coffee Filter Fits Most Conical Filter Coffeemakers - 100 Bonded Oxygen Cleansed Prefolded FiltersDispenser pack of (100) Chemex FS-100 Bonded Filter Squares. These filters will work and are designed for all sizes and styles of Chemex Coffee Brewers except the small Chemex CM-1C & CM-1 models (pint size models) 1-3 Cup Coffee Makers. Chemex filters remove even the finest sediment particles as well as the undesirable oils and fats. The formulation of the filter permits the proper infusion time by regulating the filtration rate - not to slow, not too fast. Good infusion of the coffee grounds (as in brewing and steeping tea) gives coffee a richer flavor while at the same time making possible precise fractional extraction: filtering out the undesirable components which make coffee bitter by allowing only the desirable flavor elements of the coffee bean to pass through. The Chemex filter is folded into a cone shape, exactly as in laboratory techniques. This assures uniform extraction since the water filters through all the grounds on its way to the apex of the cone. The Chemex filter is guaranteed not to burst under the weight of the liquid during filtration, and not to break when lifting out the grounds. Fully-bodied, richer flavor, from less coffee, and as strong as you like without bitterness - that's what the Chemex filter gives you.
Kitchen & Housewares
|
 |
|
|
|